How to Season Cast Iron Cookware
Cast iron seasoning is the process of building a slick, corrosion-resistant polymer layer on the surface of bare iron. The layer is formed by the thermal polymerization of fats — not by any coating applied during manufacturing.
Materials
- Bare cast iron (stripped of any factory coating)
- High-smoke-point fat (flaxseed oil, grapeseed oil, or rendered lard)
- Paper towels or a lint-free cloth
- Inside-out oven bag or aluminum foil
- Self-cleaning oven or outdoor grill
The Process
Begin by washing the pan thoroughly with hot water and a scrubber to remove any factory preseason or rust. Dry it completely, then place it in an oven at 400°F (204°C) for 10 minutes to drive off moisture.
Apply a thin coat of oil to the entire surface — exterior included — using a paper towel. The coat should be nearly translucent; a heavy hand leaves a gummy deposit rather than a smooth polymer. Place the pan upside-down on the oven's middle rack, with a drip tray on the lower rack. Bake at 500°F (260°C) for one hour. Allow to cool in the oven.
Repeat the oil-and-bake cycle a minimum of three times. Each iteration builds cumulative hardness. The goal is a glossy, dark surface that repels water and releases food with minimal fat.