How to Season Cast Iron Cookware

Cast iron seasoning is the process of building a slick, corrosion-resistant polymer layer on the surface of bare iron. The layer is formed by the thermal polymerization of fats — not by any coating applied during manufacturing.

Materials

The Process

Begin by washing the pan thoroughly with hot water and a scrubber to remove any factory preseason or rust. Dry it completely, then place it in an oven at 400°F (204°C) for 10 minutes to drive off moisture.

Apply a thin coat of oil to the entire surface — exterior included — using a paper towel. The coat should be nearly translucent; a heavy hand leaves a gummy deposit rather than a smooth polymer. Place the pan upside-down on the oven's middle rack, with a drip tray on the lower rack. Bake at 500°F (260°C) for one hour. Allow to cool in the oven.

Repeat the oil-and-bake cycle a minimum of three times. Each iteration builds cumulative hardness. The goal is a glossy, dark surface that repels water and releases food with minimal fat.